Waterproofing and Crack Prevention Membrane
On this post we want to show you some Waterproofing and Crack Prevention Membrane product that we have use before for our bathrooms, kitchen and others remodeling projects. Prevent crack in tile and stone floor by using this Custom Building Products
- RedGard Waterproofing and Crack Prevention Membrane.
Convenient to handle.
Product Width (in.): 9
Color Family: Pink
Commercial / Residential: Commercial / Residential
Flooring Material Features: Attached vapor barrier, Crack resistant, Fast-drying, Moisture resistant, Mold/mildew resistant, No mixing required, Premixed, Rapid setting, Waterproof, Waterproofing membrane
Flooring Product Type: Patching/Repair
Product Form: Roll-On
Product Weight (lb.): 10.5
Recommended Surfaces: Brick, Ceramic, Cinderblock, Coated wood, Concrete, Metal, Vinyl
- MAPEI Mapelastic 5Gal. Waterproofing Floor Tile Crack Prevention Membrane
MAPEI Mapelastic 5 Gallon Waterproofing Floor Tile Crack Prevention Membrane
Barrier to protect adjacent rooms and floors below from water damage
Applied with a roller or brush on flat or curved surfaces
Quick drying; you are able to lay tile in 30-50 minutes
5 gallon bucket covers up to 300-sqft
Use to isolate in-plane cracks up to 1/8-in
Flood test ready in 12 hours
Mold and mildew resistant
Mapelastic AquaDefense 5 GALLON is a premixed, advanced liquid-rubber, extremely quick-drying waterproofing and crack-isolation membrane for installation under ceramic tile or stone in residential, commercial and industrial environments. Mapelastic AquaDefense provides a thin, continuous barrier to protect adjacent rooms and floors below from water damage. For common problem areas like coves, corners, cracks and drains, it can be combined with MAPEI’s optional Reinforcing Fabric or Mapeband™ accessories (cove roll and drain flash) to provide additional protection. Mapelastic AquaDefense dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar. Mapelastic AquaDefense can be flood-tested after 12 hours of drying time, is IAPMO-listed for use as a shower-pan liner, and exceeds ANSI A118.10 and ANSI A118.12 standards. Create a barrier to protect adjacent rooms and floors below from water damage. Applied with a roller or brush (NOT INCLUDED) on flat or curved surfaces. Quick drying; you are able to lay tile in 30-50 minutes.
3. USG Durock Brand Liquid Waterproofing.
Item Weight: 41.3 pounds
Package Dimensions: 12 x 12 x 11.5 inches
Is Discontinued By Manufacturer: No
Batteries Included: No
Batteries Required: No